|Size||The isolation base is adapted to be assembled on a 35 mm DIN rail|
|Ranges From||Rating 1A to 15000A|
|Continuous Over Load||20 rated current|
|Temperature Coefficient||0.002 per % DegreeC|
|Operating Temperature||- 10 to 50 Deg C|
|Millivolt||50 mV, 60 mV, 75 mV, 100 mV, 150 mV.|
The RISH Shunts are available from 1A upto 3000A with an accuracy of 0.5% & 1%. Standard voltage drop is 50mV, 60mV, 75mV & 150mV. Intermediate current ratings, other voltage outputs, better accuracy and purpose built shunts can be supplied.
ApplicationShunts provide an accurate DC milli volt signal to drive ammeter indicators, overload protection and control devices, especially for higher amperage. It supplies Voltage drop proportional to the DC current which is measured and indicated by a moving-coil milli voltmeter with the dial calibrated in Amps.
Operating principleA current passing through the Shunt produces a proportional voltage drop. A moving coil instrument connected to shunt measures the voltage drop across the shunt terminals.Shunts are calibrated in such a way that they produce an accurately defined voltage drop (50mV, 60mV, 75mV and 150mV)